To go along with our new addition of the SMY-Clustermaker gauge pods we have added Prosport Gauges to our line-up of vehicle monitoring solutions. Prosport offers some unique gauges which seem to really suit what many Subaru owners are looking for. The main one being a fairly good match of the gauge back-lighting to the stock cluster back-lighting. They also offer gauges at price points not available from some of the other lines we offer such as Defi and STRI.

As part of our introduction to the line we are going to offer a sale for the next week and a half on the entire Prosport product line-up. If there is anything you're looking for from them just send us a quick PM or Email and we can provide you with pricing. Upon the close of the sale we will place the order and we should see it within a week or so.

End Date: February 8th, 2012

.:Touge::Tuning:. - Performance and Suspension Specialists
7720 Kimbel Street
Unit 32
Mississauga, On
L5S 1A6 Canada
905-405-0682
Sales@tougetuning.com

As many have seen recently Turn in Concepts is producing the CLd X-Brace for the 2002-2007 Subaru Impreza, WRX and STi Sedan. As we are the Canadian distributor for TiC we wanted to offer a group buy special to help welcome back this great product. Quantities of the first batch are limited so we recommend getting in on this right away.

Close Date: Friday September 23, 2011
Regular Price: $450 + tax + Shipping
Group Buy Price: $400 + tax + Shipping

The X-Brace - the return of awesome! We here at TiC are proud to announce that after a long absence from the market we will be bringing back the CarLab Development X-Brace. Those of you that were around a few years ago may recall this part, but for those of you who were not here’s a short explanation of what it does: As the name implies it is an “X” shaped brace which connects critical chassis points in the rear bulkhead of your 02-07 Subaru Impreza sedan. By connecting and thus triangulating these points you dramatically reinforce the chassis. The end benefits are these: 12% increase in torsional rigidity 10% increase in lateral acceleration 0.1g increase on skidpad Improved slalom speed / time Significantly reduced lap times improved ride quality Fewer squeaks and rattles

AMR has released three new turbos for the Subaru community. These turbos come loaded standard features including gaskets, lines, porting and coating. All of these great features come at a great price point, if your looking for a bolt-on internal wastegate turbo look no further! A key point about this release is that they are offering bolt-on turbos for the 2008-2010 WRX and 2005-2009 Legacy GT.

Contact us today for pricing and availability, Sales@tougetuning.com

Product: CXR500 Bolt-On Turbo
Fitment: 2008-2010 Subaru WRX / 2005-2009 Subaru Legacy GT
Power: 350whp-380whp (93 Octane) / 380whp-450whp (C16)
Features:
• 47lb/min Compressor
• 8cm Exhaust Housing
• 2.4" Compressor Inlet
• Ported Compressor Housing
• Ported Exhaust Housing
• Oil & Water Cooled
• High-Temp Coated Exhaust Housing
• Wrinkle Red Compressor Housing
• Includes all oil and water lines
• Includes all gaskets
• 1 year warranty against defects
Part Number: AMR-CXR500-LGT
MSRP: $1499 USD

Product: T60R Bolt-On Turbo
Fitment: 2002-2007 Subaru WRX / 2004-2010 Subaru WRX STi
Power: 450whp-500whp (93 Octane) / 550whp+ (C16)
Features:
• 60lb/min Compressor
• 8cm Exhaust Housing
• 3" Compressor Inlet
• Ported Compressor Housing
• Ported Exhaust Housing
• Oil & Water Cooled
• High-Temp Coated Exhaust Housing
• Wrinkle Red Compressor Housing
• Includes all oil and water lines
• Includes all gaskets
• 1 year warranty against defects
Part Number: AMR-T60R-SUB
MSRP: $1499 USD

Product: CXR500 Bolt-On Turbo
Fitment: 2002-2007 Subaru WRX / 2004-2010 Subaru WRX STi
Power: 350whp-380whp (93 Octane) / 380whp-450whp (C16)
Features:
• 47lb/min Compressor
• 8cm Exhaust Housing
• 2.4" Compressor Inlet
• Ported Compressor Housing
• Ported Exhaust Housing
• Oil & Water Cooled
• High-Temp Coated Exhaust Housing
• Wrinkle Red Compressor Housing
• Includes all oil and water lines
• Includes all gaskets
• 1 year warranty against defects
Part Number: AMR-CXR500-SUB
MSRP: $1499 USD

GSC Power Division has released JDM / Euro Spec STi Cams, technical information can be found below. For pricing and availability contact Sales@tougetuning.com

Application: Subaru EJ20 JDM/Euro Spec STi

Part Number 6027S1
S1 cams are good for the stock turbo to a 550hp turbo. 3000-7000rpm range. These cams require upgraded valve springs do to coil bind on the factory spring. (suggest spring kit 5025).

Intake 268 / 225 @ .040" / Peak Lift 10.8mm / Centerline AVCS
Exhaust 266 / 228 @ .040" / Peak Lift 10.2mm / Centerline 113

Part Number 6027S2
S2 cams are built to suite the higher horsepower Subys. With a power range of 500-750, you need some certain mods to utilize the full potential of the S2s such as a built motor and a ported head. 4000-8500 RPM Range. The S2 cams require upgraded valve springs do to coil bind on the factory spring. (spring kit 5025 is good to 28psi and 8k rpms; over 28psi or 8k rpms dual spring kit suggest)

Intake 272 / 226 @ .050" / Peak Lift 10.5mm / Centerline AVCS
Exhaust 272 / 232 @ .050" / Peak Lift 10.2mm / Centerline 113

Part Number 6027S3
The S3 cams are built to suite the highest horsepower drag Subys. With a power range of 750- 1000HP and a rev range of 4500-9500rpms, The S3 cams require abuilt motor, with a ported head (clearanced for cam lift), and a standalone engine management system. Dual valve springs are required.

Intake 282 / 240 @ .050" / Peak Lift 11.3mm / Centerline AVCS
Exhaust 282 / 240 @ .050" / Peak Lift 11.3mm / Centerline 113