GSC Power-Division has released Stage 1 and Stage 2 cams for the 4B11T motor in the 2008-2010 Mitsubishi Evolution X and the 2010 Hyundai Genesis Coupe. Quantities available are limited so pre-order your set now through Touge Tuning.

Contact - Sales@tougetuning.com
Store - www.tougetuning.com/store

Retail Price: $699.00

Part Number: 6010S1

The GSC Power-Division S1 cams for the Mitsu Evolution X are designed for those with the stock turbo up to the 550hp range These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 20-50whp (depending on Turbo) have been seen by simply bolting the S1 cams in.
• Designed for a rev range of 3000-7500rpms
• the S1 cams work well on the stock valve springs
• Intake 264 / 220 @ .040" / Peak Lift 10.2mm
• Exhaust 264 / 216 @ .040" / Peak Lift 10.0mm

Part Number: 6010S2

The GSC Power-Division S2 cams for the Mitsu Evolution X are designed for those with 600HP+ in mind. Gains of 40-80whp (depending on Turbo) have been seen by simply bolting the S2 cams in.
• Designed for a rev range of 3800-8500rpms
• The S2 cams require an upgraded valve spring.
• Intake 274 / 230 @ .050" / Peak Lift 11.2mm
• Exhaust 274 / 230 @ .050" / Peak Lift 11.0mm

Retail Price: $699.00

Part Number: 6060S1

The GSC Power-Division S1 cams for the Hyundai Genesis Coupe 4B11T are designed for those with the stock turbo up to the 550hp range These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 20-50whp (depending on Turbo) have been seen by simply bolting the S1 cams in. Designed for a rev range of 3000-7500rpms, these cams work well on the stock valve springs.
• Designed for a rev range of 3000-7500rpms
• the S1 cams work well on the stock valve springs.
• Intake 264 / 220 @ .040" / Peak Lift 10.2mm
• Exhaust 264 / 216 @ .040" / Peak Lift 10.0mm

Part Number: 6060S2

The GSC Power-Division S2 cams for the Hyundai Genesis Coupe 4B11T are designed for those with 600HP+ in mind. Gains of 20-60whp (depending on Turbo).
• Designed for a rev range of 3500-8000rpms
• The S2 cams require an upgraded valve spring.
• Intake 272 / 226 @ .040" / Peak Lift 10.4mm
• Exhaust 270 / 222 @ .040" / Peak Lift 10.2mm

Deatschwerks has released injectors for both models of the Hyundai Genesis Coupe. Two sizes, 550cc and 750cc, are available for the 2.0L Turbo and one size, 600cc, is available for the 3.8L V6. More injector sizes may be offered in the future if the need arises, if you have input let us know and we will pass your opinions on to Deatschwerks.

We will be adding these to our webstore shortly but if you would like to order these now just send us an email.

Contact - Sales@tougetuning.com